Red Devil Construction Adhesive – How to Use Construction Adhesive
Subscribe for new videos and visit https://www.reddevil.com/ to see our products.
RED DEVIL GENERAL PURPOSE CONSTRUCTION ADHESIVE
• NO SOLVENTS
• WATER CLEAN UP
This professional-strength, VOC-complaint formula exceeds the performance requirements of ASTM C-557 and is ideal for wood stone, hardboard, gypsum wallboard, slate, ceramic tile, polyurethane and polystyrene foams.
Wood flooring, lumber, treated lumber, trim & paneling, drywall, metal, foam-board/plastic, masonry/concrete.
• Surfaces must be clean and free of any material that may prevent adequate adhesion.
• Cut tip on slant for a 1/4″ to 3/8″ bead size and place in caulk gun.
• Apply adhesive to one of the surfaces in either a continuous or spot bead.
• Press surfaces together firmly with a slight twisting motion. Certain large applications may require additional bracing until the adhesive has dried.
Tools and adhesive may be cleaned with water while the adhesive is wet. If dried, tools and adhesives may be cleaned with mineral spirits.
WORKING TIME: 15 minutes
Not designed for continuous submersion. Not recommend for tub surround. Not for bonding mirrors. For best results, store above 40°F.
COVERAGE: Approximately 32 linear feet of 1/4″ bead.